This product is subject to the jurisdiction of the U.S. Department of State in accordance with the International Traffic in Arms regulations (ITAR) (22CFR 120 through 130). A license or other approval is required to the ITAR prior to any Export or Temporary Import. Please contact email@example.com for additional information.
With the introduction of the new Armasight by FLIR CO-XLR LRF, we have pushed the boundaries of Night Vision systems further than they’ve ever gone. The Armasight by FLIR CO-XLR LRF (Clip On – Extra Long- Range) is a night vision unit that mounts in front of any existing day scope, converting the scope into a night vision-capable device with a viewing range of up to 1,500 yards. Suitable for use with most commercial and military specification daytime scopes (up to 16X magnification), the COXLR LRF can be mounted/dismounted on any standard Picatinny rail in seconds, with no special tools required. Because the CO-XLR LRF can be mounted in front of your existing day scope, no rezeroing is required. The CO-XLR LRF allows the user to maintain consistent positioning and shooting accuracy, all while maintaining the use of a fully familiar day scope.
The Armasight by FLIR CO-XLR LRF is intended for use by the most demanding hunter, long-range target shooter, and military or LE personnel. Its CO-LR LRF housing is designed to withstand any environmental condition.
The CO-XLR LRF is packed with innovative features like variable gain control, bright light shut-off, and wireless remote control. This night vision clip-on is designed to make long-range night shooting just as easy and accurate as daytime shooting in the same terrain.
The Armasight by FLIR CO-XLR LRF can be equipped with high-performance, Gen 2+ and Gen 3 variants image intensifier tubes, using either Green phosphor or Armasight’s “Quick Silver” and “Ghost” image intensifier tubes, which provide users with natural B&W images.
- Simple and quick conversion of any day scope into a night vision device
- Mounts in front of riflescope with no re-zeroing required
- Equipped with wireless remote control
- Variable gain control
- Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery
- Low battery indicator
- Quick-release mount
- Bright light cut-off system
- Limited two-year warranty
|IIT Generation||Gen 3 Alpha (High Performance) MG|
|Magnification||1x (recommended to use with up to 16x day time optics)|
|Lens System||F/1.8; 145 mm|
|Field of View||7°|
|Focus Range||25m to Infinity|
|Exit Pupil Diameter||50 mm|
|Manual Gain Control||Yes|
|Bright Light Cut-off||Yes|
|Low Battery Indicator||Yes (in FOV)|
|Infrared Illuminator||XLR-IR850 Detachable Long-Range|
|Power Supply||CR123 Lithium 3V (1) or AA Alkaline 1.5V (1) or any AA or CR123 type rechargeable batteries with voltage from 1.2V to 3.7V (1)|
|Battery Life||Up to 60 hours|
|Operating Temperature||-40°C to +50°С (-40°F to 122°F)|
|Storage Temperature||-50°C to +70°С (-58°F to 158°F)|
|Height of the Scope Axis above Rail||40 mm|
|Overall Dimensions||305 × 104 × 94 mm (12.0 × 4.0 × 3.7 in)|
|Dimensions without lens caps||295 × 104 × 94 mm (11.6 × 4.0 × 3.7 in)|
|Weight (without Mount and Remote Control)||1.30 kg (2.86 lbs)|
|* All data subject to change without notice.|