ARMASIGHT CO-Mini GEN 3P MG Night Vision Mini Clip-On System

Part Number: NSCCOMINI1P9DA1
$ 4,995.00

add to cart

Gen 3+ Pinnacle



This product is subject to the jurisdiction of the U.S. Department of State in accordance with the International Traffic in Arms regulations (ITAR) (22CFR 120 through 130). A license or other approval is required to the ITAR prior to any Export or Temporary Import. Please contact for additional information.


Designed for short-to-medium ranges, the Armasight CO-MINI is the most compact commercially available Clip-On Night Vision Device. The CO-MINI uses image intensification technology and is designed to convert most low-to-mid power daytime sights, scopes, or binoculars to operate at night. The CO-MINI can be mounted in seconds and without tools. It can be attached in front of a day rifle scope (using its quick release Picatinny mount) or directly onto the day scope (or binocular/ telescope) objective lens with the included adaptor.

Suitable for use with most commercial and military specification day time sights, telescopes or binoculars (up to 6X magnification). Because the CO-mini is mounted in front of your own day scope, the shooters eye relief is not altered, and shot release and follow through all remain intuitive. The clip-on device is factory bore-sighted to better than 1MOA accuracy, so no alteration in zero is experienced, and it really is as simple as mount and shoot, just as in day time.

The Armasight CO-MINI is intended primarily for use by the most demanding hunter or short range assaulter, where field of view and ease of use is more important than high magnification. Packed with innovative and important features – variable gain control, bright light shut-off, wireless remote control are just a few – the Armasight CO-MINI is designed to make quick intuitive shooting just as easy at night as it is during the day.

Whether your day scope is a well known brand or not, the Armasight CO-MINI will work just as well at magnifications 2-6X. Available in a variety of high performing Gen 2+ and Gen 3 image tube options to cater for all budgets, the CO-MINI brings high quality clip-on night vision within everyone’s reach.


  • Converts your day scope, sight, or binoculars into night vision-capable devices
  • Mounts in front of any day scope with no re-zeroing required
  • Available in a variety of high-performing Gen 2+ and Gen 3 image intensifier tube options
  • Wireless remote control
  • Fixed-focus objective lens effective at distances further than 20m
  • Automatic or manual (CO-MINI MG only) gain control
  • Powered by a single AA or CR123A battery
  • Bright light cut-off system
  • Low battery indicators
  • Water and Fog-Resistant / Waterproof (optional)
  • Filled with dry nitrogen to prevent internal fogging
  • Mounts on Picatinny/ Weaver rail with a quick-release mount
  • Mounts on the lenses of specified day scopes with the optional adapters
  • Long-range XLR-IR850 infrared illuminator
  • MIL-Standard compliant
  • Limited two-year warranty


IIT Generation Gen 3 High Performance ITT PINNACLE
Resolution 64-72 lp/mm
Magnification 1x (recommended to use with up to 10x day time optics)
Photocathode Type GaAs
Lens System F/1.25; 38mm
Field of View 22°
Focus Range 20m to Infinity
Exit Pupil Diameter 27.5 mm
Remote Control Wireless
Manual Gain Control Yes
Bright Light Cut-off Yes
Automatic Shut-off System Yes
Low Battery Indicator Yes
Infrared Illuminator Detachable Long Range IR Illuminator
Power Supply CR123 Lithium 3V (1), or AA Alkaline 1.5V (1), or any AA or CR123 type rechargeable batteries with voltage from 1.2V to 3.2V (1)
Battery Life 60 hrs (3V) / 40 hrs (1.5V)
Environmental Rating Water and Fog-Resistant / Waterproof (optional)
MIL-STD-810 Yes
Operating Temperature -40° to +50°С (-40° to 122°F)
Storage Temperature -50° to +50°С (-58° to 122°F)
Overall Dimensions 125 × 68 × 55 mm (4.9 x 2.7 x 2.2 in)
Weight (without Mount and Remote Control) 0.43 kg (0.95 lbs)
Warranty 2 Years
* All data subject to change without notice.  
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 160.62ms
  • bvseo-msg: HTTP status code of 403 was returned;

Hello. I'm interested to know the difference between the products bellow - armasight co-mini clip on gen 3P MG - armasight co-mini clip on gen ghost MG Which one is better? 

Asked by: Luciano
  • 2016-10-13T06:03CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_3266, PRD, sort_recentAnswersFirst
  • clientName_Armasight
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 86.1ms


  • Packing BoxPacking Box
  • Soft carrying CaseSoft carrying Case
  • BatteryBattery
  • Battery adapter CR123A 3V / AA 1,5VBattery adapter CR123A 3V / AA 1,5V
  • Lens TissueLens Tissue
  • Instruction Manual with Warranty CardInstruction Manual with Warranty Card
  • Special WrenchSpecial Wrench
  • AWReC (Advanced Wireless Remote Control) #94AWReC (Advanced Wireless Remote Control) #94
  • Picatinny adapter for AWReC (Advanced Wireless Remote Control)Picatinny adapter for AWReC (Advanced Wireless Remote Control)
  • Light Suppressor for Day ScopeLight Suppressor for Day Scope
  • Light-Suppressor 1Light-Suppressor 1
  • Light-Suppressor 2Light-Suppressor 2
  • Light-Suppressor 3Light-Suppressor 3
  • Quick Release MountQuick Release Mount
  • XLR-IR850 Detachable X-Long Range Infrared IlluminatorXLR-IR850 Detachable X-Long Range Infrared Illuminator


  Night Vision  Night Vision Clip-on Systems